我有一款公路自行车，计划不久后进行彻底检修。多年来，对于几辆自行车，我已经对大部分组件进行了大修，但从未尝试过为整辆自行车做这些事情，直到开始完成。
自行车大修是否有最佳顺序？还是有关系吗？
Answers:
我有两个很棒的大修清单链接。我为个人使用而修改的清单之一，其中包括。
首先是来自联合自行车学院（清单PDF链接）-UBI是美国首屈一指的自行车机械学校之一。
以下是我从“ 便捷循环”博客中修改的内容（该博客现在已死...），这是我在个人商店中使用的内容。
Wheel Systems:
[ ] Front Hub bearings greased.
[ ] Front Hub bearings adjusted to not be tight or loose.
[ ] Rear Hub bearings greased.
[ ] Rear Hub bearings adjusted to not be tight or loose.
[ ] All hubs locknuts secured.
[ ] Hubs inspected for bent axles and external evidence of internal problems.
[ ] Rims trued laterally to .5mm tolerance or better.
[ ] Rims inspected for damaged or other work needed.
[ ] Tires checked for proper wear and damage, proper mounting, and inflation.
[ ] Wheels mounted in proper alignment and secure.
Drive Train System:
[ ] Bottom Bracket greased
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket adjusted to not be tight or loose.
[ ] Bottom Bracket inspected for external evidence of internal problems.
[ ] Crank arms securely mounted.
[ ] Chainrings bolts secured.
[ ] Wobbling chainrings aligned.
[ ] Pedals lubricated
[ ] Pedals securely mounted.
[ ] Chain cleaned
[ ] Chain lubed and whipped down
[ ] Chain inspected for wear
[ ] Freewheel cleaned and rinsed
[ ] Freewheel inspected for wear
[ ] Freewheel lubricated.
Brake System:
[ ] Cables lubricated and replaced if worn.
[ ] Front Braking surface cleaned and checked for ware.
[ ] Rear Braking surface cleaned and checked for ware.
[ ] Brake calipers checked for mounting security.
[ ] Caliper arms and pivot/mounting bolts checked for damage.
[ ] Adjustable brake pivots adjusted for no play or binding.
[ ] Pivot nut/bolts checked for secure.
[ ] Brake caliper lubricated at pivots, springs, and cable adjuster barrels.
[ ] Brake barrels adjusters reseted.
[ ] Brake pads checked for wear and replaced if more than 50% worn.
[ ] Brake pad height set so as not to rub tire or hit partially below rim.
[ ] Pads set tangent [parallel] to rim.
[ ] New pads set with .5mm to 1.5mm toe to reduce squeal.
[ ] Pads clearance set to 1mm -2mm per side [except MTB type].
[ ] MTB pad clearance set so that when the pads contact the rim the lever clears the handlebar by a minimum of 1 inch.
[ ] Brake levers set to proper alignment and secure.
[ ] Brake level pivots, cable anchor pivots, and cable adjusters lubricated.
[ ] Cable removed and inspected for rust, frays, and kinks in the inner wire and housing.
[ ] Housings sized to proper length and ends finished with filing and end caps where fit.
[ ] Cables lubricated wherever they pass through housings.
[ ] Cable system stress tested by pulling brake lever fully to handlebar a minimum of ten times.
[ ] Cable end finished with cap or soldering.
[ ] Rims cleaned of lubricants and road grime.
Shift Systems:
[ ] Cables lubed and replaced if necessary
[ ] Rear derailleur removed and hanger checked for proper alignment.
[ ] Rear derailleur pivots, cable adjusters, and jockey wheels lubricated.
[ ] Rear derailleur inspected for damage and worn jockey wheels.
[ ] Rear derailleur mounted securely.
[ ] Front derailleur checked for proper mounting height and rotation.
[ ] Front derailleur checked for proper secure mounting.
[ ] Front derailleur pivots lubricated.
[ ] Derailleur cables removed and inspected for rust, frays, and kinks in the inner wires and housings.
[ ] Housings sized to proper length and ends finished with filing and end caps wherever they improve fit.
[ ] Cables lubricated wherever they pass through housings when appropriate.
[ ] Cables pre-stressed.
[ ] Chain length checked.
[ ] Rear derailleur limit screws set to allow shift to largest and smallest sprockets.
[ ] Rear derailleur checked for over shift at all gear combinations.
[ ] Front derailleur limit screws set for minimum clearance of the derailleur cage to the chain in high and low gear.
[ ] Front derailleur checked for over shift at all gear combinations.
Steering System:
[ ] Headset lubricated.
[ ] Headset adjusted to not be tight or loose.
[ ] Headset locknut secured.
[ ] Headset inspected for external evidence of damage, wear, or loose cups.
[ ] Fork inspected for damage.
[ ] Stem inspected for proper depth insertion, alignment, and secure.
[ ] Handlebars inspected for damage, proper alignment, and secure.
Miscellaneous:
[ ] Frame checked for damage.
[ ] Seat post checked for allowable minimum depth of insertion.
[ ] Seat post secure mounting checked.
[ ] Seat checked for proper alignment and secure mounting.
[ ] Accessories checked for mounting security and interference with moving parts or safety hazards.
Test Ride:
[ ] Brakes checked for stopping power and squeal.
[ ] Bicycle checked for tracking problems.
[ ] Derailleurs checked for performance and over shift.
[ ] Chain and freewheel cogs checked for skipping under load.
[ ] Bicycle checked for unusual noises.
我通常首先将框架剥离下来。如果不走那么远，我会保留电缆，但至少要将耳机拆开并取出BB。一旦达到目标，我将结束框架，然后继续前进。拉出轴承并检查滚珠，如有需要，更换新的滚珠并重新包装轮毂。由于此时磁带盒大部分都分开，因此我也要清洁它。
我从来没有需要过重建的踏板，但我想我应该在重新安装曲柄之后再做。
然后放回去。
看到OP中的链接不起作用，这是文本清单，这是PDF：
[ ] Front Hub berings greased.
[ ] Front Hub berings adjusted to not be tight or loose.
[ ] Rear Hub berings greased.
[ ] Rear Hub berings adjusted to not be tight or loose.
[ ] All hubs locknuts secured.
[ ] Hubs inspected for bent axles and external evidence of internal problems.
[ ] Rims trued laterally to .5mm tolerance or better.
[ ] Rims inspected for damaged or other work needed.
[ ] Tires checked for proper wear and damage, proper mounting, and inflation.
[ ] Wheels mounted in proper alignment and secure.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Drive Train System:
[ ] Bottom Bracket greased
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket fixed cup secured.
[ ] Bottom Bracket adjusted to not be tight or loose.
[ ] Bottom Bracket inspected for external evidence of internal problems.
[ ] Crank arms securely mounted.
[ ] Chainrings bolts secured.
[ ] Wobbling chainrings aligned.
[ ] Pedals lubricated
[ ] Pedals securely mounted.
[ ] Chain cleaned
[ ] Chain lubed and whipped down
[ ] Chain inspected for wear
[ ] Freewheel cleaned and rinsed
[ ] Freewheel inspected for wear
[ ] Freewheel lubricated.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Steering System:
[ ] Headset lubricated.
[ ] Headset adjusted to not be tight or loose.
[ ] Headset locknut secured.
[ ] Headset inspected for external evidence of damage, wear, or loose cups.
[ ] Fork inspected for damage.
[ ] Stem inspected for proper depth insertion, alignment, and secure.
[ ] Handlebars inspected for damage, proper alignment, and secure.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention.
Brake System:
[ ] Cables lubricated and replaced if worn.
[ ] Front Braking surface cleaned and checked for ware.
[ ] Rear Braking surface cleaned and checked for ware.
[ ] Brake calipers checked for mounting security.
[ ] Caliper arms and pivot/mounting bolts checked for damage.
[ ] Adjustable brake pivots adjusted for no play or binding.
[ ] Pivot nut/bolts checked for secure.
[ ] Brake caliper lubricated at pivots, springs, and cable adjuster barrels.
[ ] Brake barrels adjusters reseted.
[ ] Brake pads checked for wear and replaced if more than 50% worn.
[ ] Brake pad height set so as not to rub tire or hit partially below rim.
[ ] Pads set tangent [parallel] to rim.
[ ] New pads set with .5mm to 1.5mm toe to reduce squeal.
[ ] Pads clearance set to 1mm -2mm per side [except MTB type].
[ ] MTB pad clearance set so that when the pads contact the rim the lever clears the handlebar by a minimum of 1 inch.
[ ] Brake levers set to proper alignment and secure.
[ ] Brake level pivots, cable anchor pivots, and cable adjusters lubricated.
[ ] Cable removed and inspected for rust, frays, and kinks in the inner wire and housing.
[ ] Housings sized to proper length and ends finished with filing and end caps where fit.
[ ] Cables lubricated wherever they pass through housings.
[ ] Cable system stress tested by pulling brake lever fully to handlebar a minimum of ten times.
[ ] Cable end finished with cap or soldering.
[ ] Rims cleaned of lubricants and road grime.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Shift Systems:
[ ] Cables lubed and replaced if necessary
[ ] Rear derailleur removed and hanger checked for proper alignment.
[ ] Rear derailleur pivots, cable adjusters, and jockey wheels lubricated.
[ ] Rear derailleur inspected for damage and worn jockey wheels.
[ ] Rear derailleur mounted securely.
[ ] Front derailleur checked for proper mounting height and rotation.
[ ] Front derailleur checked for proper secure mounting.
[ ] Front derailleur pivots lubricated.
[ ] Derailleur cables removed and inspected for rust, frays, and kinks in the inner wires and housings.
[ ] Housings sized to proper length and ends finished with filing and end caps wherever they improve fit.
[ ] Cables lubricated wherever they pass through housings when appropriate.
[ ] Cables pre-stressed.
[ ] Chain length checked.
[ ] Rear derailleur limit screws set to allow shift to largest and smallest sprockets.
[ ] Rear derailleur checked for over shift at all gear combinations.
[ ] Front derailleur limit screws set for minimum clearance of the derailleur cage to the chain in high and low gear.
[ ] Front derailleur checked for over shift at all gear combinations.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Miscellaneous:
[ ] Frame checked for damage.
[ ] Seat post checked for allowable minimum depth of insertion.
[ ] Seat post secure mounting checked.
[ ] Seat checked for proper alignment and secure mounting.
[ ] Accessories checked for mounting security and interference with moving parts or safety hazards.
[ ] ALL DONE
[ ] SEE NOTES: Problems in need of further attention
Test Ride:
[ ] Frame cleaned.
[ ] Frame waxed.
[ ] Frame checked for damage.
[ ] Brakes checked for stopping power and squeal.
[ ] Bicycle checked for tracking problems.
[ ] Derailleurs checked for performance and over shift.
[ ] Chain and freewheel cogs checked for skipping under load.
[ ] Bicycle checked for unusual noises.
Notes: These problems could not be repaired and/or are in need of further attention;
我从基本的M检查开始-自行车怎么了。列出需要做的事情。这意味着要仔细检查车架是否有损坏/破裂-如果车架是注销的，则仅是零件供体并被剥离。
我首先删除所有不良位，然后确定它们在重建后是否可维修或是否需要更换。
一旦一切都停了下来，我就决定是否值得修理。避免将大量时间浪费在脚踏车上。那里有很多自行车，虽然多愁善感和历史有助于改变界限，但您仍然需要选择。
依次处理每个子系统。IE浏览器，我会使BB完美，然后继续曲柄。然后是后轮，飞轮，拨链器，链条。
在进行操作之前，请务必先清洁物品。一辆干净的自行车比较好用。首先是脏零件-变速器，轮毂，轮辋等。
将整理细节留到以后。鞍座，篷布，反光镜，制动器/变速杆的内部电缆以及制动器都接近该顺序。
最后，测试自行车。您应该骑几分钟，首先要慢一点，然后加快速度，测试刹车和换挡。
4-6周后，您将同样需要调整制动器和变速杆电缆-它们会随着使用而停顿。