Strongswan VPN隧道已连接，但流量未通过该路由

15

我刚刚在Strongswan（4.5）的站点到站点之间建立了一个VPN隧道。隧道看起来不错，并已连接到另一侧，但是似乎无法通过该隧道路由流量。

任何想法？

谢谢！

网络图

+----------------------------------+
|Dedicated server: starfleet       |                   +-----------------+
|                                  |                   |  CISCO ASA      |
|        +-------------------------|     internet      |                 |
|        |eth0: XX.XX.XX.195/29    +-------------------|  YY.YYY.YYY.155 |
|        +-------------------------|                   +------+----------+
|        |virbr1: 192.168.100.1/24 |                          |
|        +----+--------------------|                          |
|             |                    |                          |
|             |                    |                   +-----------------+
|             |                    |                   |network          |
|     +-------+                    |                   |                 |
|     |                            |                   |172.30.20.0/27   |
|     |                            |                   +-----------------+
| +------------------------------+ |
| | kvm server: enterprise       | |
| |                              | |
| |                              | |
| | eth0: 192.168.100.100/24     | |
| +------------------------------+ |
+----------------------------------+

软件

  • Debian Wheezy
  • Strongswan 4.5.2-1.5 + deb7u1
  • kvm和libvirt（192.168.100.x网络）

/etc/ipsec.conf

root@starfleet ~ # cat /etc/ipsec.conf
# ipsec.conf - strongSwan IPsec configuration file

# basic configuration

config setup
    plutodebug="all"
    plutostderrlog=/var/log/pluto-ipsec
    charonstart=no
    plutostart=yes

conn net-net
     ikelifetime=86400s
     keylife=3600s
     rekeymargin=3m
     keyingtries=1
     keyexchange=ikev1
     authby=secret
     ike=aes256-sha-modp1024!
     esp=aes256-sha
     right=YY.YYY.YYY.155
     rightsubnet=172.30.20.0/27
     left=XX.XX.XX.195
     leftsubnet=192.168.100.0/24
     leftfirewall=yes
     pfs=no
     auto=add

ipsec上升

root@starfleet ~ # ipsec up net-net
002 "net-net" #1: initiating Main Mode
102 "net-net" #1: STATE_MAIN_I1: initiate
003 "net-net" #1: ignoring Vendor ID payload [FRAGMENTATION c0000000]
104 "net-net" #1: STATE_MAIN_I2: sent MI2, expecting MR2
003 "net-net" #1: ignoring Vendor ID payload [Cisco-Unity]
003 "net-net" #1: received Vendor ID payload [XAUTH]
003 "net-net" #1: ignoring Vendor ID payload [###############################]
003 "net-net" #1: ignoring Vendor ID payload [Cisco VPN 3000 Series]
106 "net-net" #1: STATE_MAIN_I3: sent MI3, expecting MR3
002 "net-net" #1: Peer ID is ID_IPV4_ADDR: 'YY.YYY.YYY.155'
002 "net-net" #1: ISAKMP SA established
004 "net-net" #1: STATE_MAIN_I4: ISAKMP SA established
002 "net-net" #2: initiating Quick Mode PSK+ENCRYPT+TUNNEL+UP {using isakmp#1}
110 "net-net" #2: STATE_QUICK_I1: initiate
002 "net-net" #2: sent QI2, IPsec SA established {ESP=>0x8a12ab22 <0xa01abba1}
004 "net-net" #2: STATE_QUICK_I2: sent QI2, IPsec SA established {ESP=>0x8a12ab22     <0xa01abba1}

root@starfleet ~ # ipsec status
000 "net-net":     192.168.100.0/24===XX.XX.XX.195[XX.XX.XX.195]...YY.YYY.YYY.155[YY.YYY.YYY.155]===172.30.20. 0/27; erouted; eroute owner: #2
000 "net-net":   newest ISAKMP SA: #1; newest IPsec SA: #2; 
000 
000 #2: "net-net" STATE_QUICK_I2 (sent QI2, IPsec SA established); EVENT_SA_REPLACE in 3331s; newest IPSEC; eroute owner
000 #2: "net-net" esp.8a12ab22@YY.YYY.YYY.155 (0 bytes) esp.a01abba1@XX.XX.XX.195 (0 bytes); tunnel
000 #1: "net-net" STATE_MAIN_I4 (ISAKMP SA established); EVENT_SA_REPLACE in 86050s; newest ISAKMP
000

网络信息

tun0接口由openvpn服务器使用。

virbr1接口是kvm网络

root@starfleet ~ # ip -4 a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    inet XX.XX.XX.195/29 brd XX.XX.XX.199 scope global eth0
3: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
    inet 10.8.0.1 peer 10.8.0.2/32 scope global tun0
5: virbr1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP 
    inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1

root@starfleet ~ # ip -4 r s t 0
default via XX.XX.XX.193 dev eth0 
10.8.0.0/16 via 10.8.0.2 dev tun0 
10.8.0.2 dev tun0  proto kernel  scope link  src 10.8.0.1 
XX.XX.XX.192/29 via XX.XX.XX.193 dev eth0 
XX.XX.XX.192/29 dev eth0  proto kernel  scope link  src XX.XX.XX.195 
192.168.100.0/24 dev virbr1  proto kernel  scope link  src 192.168.100.1 
local 10.8.0.1 dev tun0  table local  proto kernel  scope host  src 10.8.0.1 
broadcast XX.XX.XX.192 dev eth0  table local  proto kernel  scope link  src XX.XX.XX.195 
local XX.XX.XX.195 dev eth0  table local  proto kernel  scope host  src XX.XX.XX.195 
broadcast XX.XX.XX.199 dev eth0  table local  proto kernel  scope link  src XX.XX.XX.195 
broadcast 127.0.0.0 dev lo  table local  proto kernel  scope link  src 127.0.0.1 
local 127.0.0.0/8 dev lo  table local  proto kernel  scope host  src 127.0.0.1 
local 127.0.0.1 dev lo  table local  proto kernel  scope host  src 127.0.0.1 
broadcast 127.255.255.255 dev lo  table local  proto kernel  scope link  src 127.0.0.1 
broadcast 192.168.100.0 dev virbr1  table local  proto kernel  scope link  src 192.168.100.1 
local 192.168.100.1 dev virbr1  table local  proto kernel  scope host  src 192.168.100.1 
broadcast 192.168.100.255 dev virbr1  table local  proto kernel  scope link  srr 192.168.100.1

root@starfleet ~ # ip xfrm state
src XX.XX.XX.195 dst YY.YYY.YYY.155
    proto esp spi 0x8a12ab22 reqid 16384 mode tunnel
    replay-window 32 flag af-unspec
    auth-trunc hmac(sha1) 0x######################################## 96
    enc cbc(aes) 0x################################################################
src YY.YYY.YYY.155 dst XX.XX.XX.195
    proto esp spi 0xa01abba1 reqid 16384 mode tunnel
    replay-window 32 flag af-unspec
    auth-trunc hmac(sha1) 0x######################################## 96
    enc cbc(aes) 0x################################################################

root@starfleet ~ # ip xfrm policy
src 192.168.100.0/24 dst 172.30.20.0/27 
    dir out priority 1847 ptype main 
    tmpl src XX.XX.XX.195 dst YY.YYY.YYY.155
        proto esp reqid 16384 mode tunnel
src 172.30.20.0/27 dst 192.168.100.0/24 
    dir fwd priority 1847 ptype main 
    tmpl src YY.YYY.YYY.155 dst XX.XX.XX.195
        proto esp reqid 16384 mode tunnel
src 172.30.20.0/27 dst 192.168.100.0/24 
    dir in priority 1847 ptype main 
    tmpl src YY.YYY.YYY.155 dst XX.XX.XX.195
        proto esp reqid 16384 mode tunnel
src ::/0 dst ::/0 
    socket out priority 0 ptype main 
src ::/0 dst ::/0 
    socket in priority 0 ptype main 
src ::/0 dst ::/0 
    socket out priority 0 ptype main 
src ::/0 dst ::/0 
    socket in priority 0 ptype main 
src 0.0.0.0/0 dst 0.0.0.0/0 
    socket out priority 0 ptype main 
src 0.0.0.0/0 dst 0.0.0.0/0 
    socket in priority 0 ptype main 
src 0.0.0.0/0 dst 0.0.0.0/0 
    socket out priority 0 ptype main 
src 0.0.0.0/0 dst 0.0.0.0/0 
    socket in priority 0 ptype main 

root@starfleet ~ # ip route show table 220
root@starfleet ~ # 

root@starfleet ~ # route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         XX.XX.XX.193    0.0.0.0         UG    0      0        0 eth0
10.8.0.0        10.8.0.2        255.255.0.0     UG    0      0        0 tun0
10.8.0.2        0.0.0.0         255.255.255.255 UH    0      0        0 tun0
XX.XX.XX.192    XX.XX.XX.193    255.255.255.248 UG    0      0        0 eth0
XX.XX.XX.192    0.0.0.0         255.255.255.248 U     0      0        0 eth0
192.168.100.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr1

iptables

root@starfleet ~ # iptables-save 
# Generated by iptables-save v1.4.14 on Fri May 24 16:07:39 2013
*nat
:PREROUTING ACCEPT [11:368]
:INPUT ACCEPT [1:48]
:OUTPUT ACCEPT [13:1012]
:POSTROUTING ACCEPT [13:1012]
-A POSTROUTING -s 10.8.0.0/16 ! -d 10.8.0.0/16 -o virbr1 -j MASQUERADE
-A POSTROUTING -s 192.168.100.0/24 ! -d 192.168.100.0/24 -p tcp -j MASQUERADE --to-ports 1024-65535
-A POSTROUTING -s 192.168.100.0/24 ! -d 192.168.100.0/24 -p udp -j MASQUERADE --to-ports 1024-65535
-A POSTROUTING -s 192.168.100.0/24 ! -d 192.168.100.0/24 -j MASQUERADE
COMMIT
# Completed on Fri May 24 16:07:39 2013
# Generated by iptables-save v1.4.14 on Fri May 24 16:07:39 2013
*mangle
:PREROUTING ACCEPT [271:19504]
:INPUT ACCEPT [261:19184]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [181:28686]
:POSTROUTING ACCEPT [181:28686]
-A POSTROUTING -o virbr1 -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill
COMMIT
# Completed on Fri May 24 16:07:39 2013
# Generated by iptables-save v1.4.14 on Fri May 24 16:07:39 2013
*filter
:INPUT ACCEPT [46:3380]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [36:5220]
-A INPUT -i virbr1 -p udp -m udp --dport 53 -j ACCEPT
-A INPUT -i virbr1 -p tcp -m tcp --dport 53 -j ACCEPT
-A INPUT -i virbr1 -p udp -m udp --dport 67 -j ACCEPT
-A INPUT -i virbr1 -p tcp -m tcp --dport 67 -j ACCEPT
-A FORWARD -s 172.30.20.0/27 -d 192.168.100.0/24 -i eth0 -m policy --dir in --pol ipsec --reqid 16384 --proto esp -j ACCEPT
-A FORWARD -s 192.168.100.0/24 -d 172.30.20.0/27 -o eth0 -m policy --dir out --pol ipsec --reqid 16384 --proto esp -j ACCEPT
-A FORWARD -s 10.8.0.0/16 -o virbr1 -j ACCEPT
-A FORWARD -i virbr1 -o tun0 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -d 192.168.100.0/24 -o virbr1 -m state --state RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.100.0/24 -i virbr1 -j ACCEPT
-A FORWARD -i virbr1 -o virbr1 -j ACCEPT
-A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
COMMIT
# Completed on Fri May 24 16:07:39 2013

TcpDumping从192.168.100.100到172.30.20.9

所有命令同时运行。

root@enterprise:~# ping 172.30.20.9
PING 172.30.20.9 (172.30.20.9) 56(84) bytes of data.
^C
--- 172.30.20.9 ping statistics ---
6 packets transmitted, 0 received, 100% packet loss, time 4999ms

root@enterprise:~# tcpdump -v -n dst net 172.30.20.0/27
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
16:23:48.919819 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.100.100 > 172.30.20.9: ICMP echo request, id 2605, seq 1, length 64
16:23:49.918949 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.100.100 > 172.30.20.9: ICMP echo request, id 2605, seq 2, length 64
16:23:50.918950 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.100.100 > 172.30.20.9: ICMP echo request, id 2605, seq 3, length 64
16:23:51.918952 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.100.100 > 172.30.20.9: ICMP echo request, id 2605, seq 4, length 64
16:23:52.918954 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.100.100 > 172.30.20.9: ICMP echo request, id 2605, seq 5, length 64
16:23:53.918951 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
192.168.100.100 > 172.30.20.9: ICMP echo request, id 2605, seq 6, length 64

root@starfleet ~ # tcpdump -v -n dst net 172.30.20.0/27
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
16:23:50.475100 IP (tos 0x0, ttl 63, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
XX.XX.XX.195 > 172.30.20.9: ICMP echo request, id 2605, seq 1, length 64
16:23:51.474262 IP (tos 0x0, ttl 63, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
XX.XX.XX.195 > 172.30.20.9: ICMP echo request, id 2605, seq 2, length 64
16:23:52.474280 IP (tos 0x0, ttl 63, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
XX.XX.XX.195 > 172.30.20.9: ICMP echo request, id 2605, seq 3, length 64
16:23:53.474251 IP (tos 0x0, ttl 63, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
XX.XX.XX.195 > 172.30.20.9: ICMP echo request, id 2605, seq 4, length 64
16:23:54.474213 IP (tos 0x0, ttl 63, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
XX.XX.XX.195 > 172.30.20.9: ICMP echo request, id 2605, seq 5, length 64
16:23:55.474173 IP (tos 0x0, ttl 63, id 0, offset 0, flags [DF], proto ICMP (1), length 84)
XX.XX.XX.195 > 172.30.20.9: ICMP echo request, id 2605, seq 6, length 64
linux  vpn  kvm-virtualization  cisco-asa  strongswan 
— Telemaco
source

Answers:

10

tcpdump在starfleet上的会话输出揭示了问题所在。由于这里有NAT规则

-A POSTROUTING -s 192.168.100.0/24 ! -d 192.168.100.0/24 -j MASQUERADE

具有源地址的ICMP请求192.168.100.100被设置为xx.xx.xx.195。由于协商的IPsec策略是针对来自的流量，192.168.100.0/24因此不会对xx.xx.xx.195这些数据包进行加密。从通过Netfilter的数据包流的示意图中可以看出，在对IPsec转换进行任何查找（xfrm查找）之前，先应用nat表中POSTROUTING链中的规则。

为了解决这个问题做一个如下：

  • 从MASQUERADE规则（! -d 172.30.20.0/27）中明确排除到目标子网的流量

  • 在MASQUERADE规则之前添加一个明确的豁免规则

    -A POSTROUTING -s 192.168.100.0/24 -m policy --dir out --pol ipsec -j ACCEPT

  • 保留MASQUERADE规则leftsubnet=xx.xx.xx.195/32不变，但进行配置（需要调整Cisco ASA框上的配置，并且如果站点到站点隧道实际上是您的目标则无济于事）

— ecdsa
source
感谢您的答复。我已经一一尝试了三个建议，但它不起作用。我关闭了除eth0之外的所有接口（我也清除了iptables），并且应用了第三条建议，流量没有路由。任何想法？
— telemaco
最后，在Cisco asa方面配置leftsubnet = xx.xx.xx.195 / 32和一些nat横向配置，这很有效！:)谢谢
— telemaco
2

我的情况与@telemaco描述的情况非常相似。我的便携式计算机上的KVM上运行了一些测试VM。我的笔记本电脑通过DHCP接收了IP地址，因此Strongswan通过分配了VPN端点IP地址leftsourceip=%config。

VM使用专用网络192.168.100.0/24。我的笔记本电脑（KVM主机）192.168.50.2/24通过DHCP 接收10.0.0.10/26来自Strongswan的IP地址和终结点IP地址。

虚拟机应访问192.168.0.0/24通过VPN路由的网络。

根据@ecdsa提供的答案，我通过添加以下规则使此工作有效：

-t nat -I POSTROUTING -s 192.168.100.0/24 -d 192.168.0.0/24 -j SNAT --to-source 10.0.0.10

就我而言，ip xfrm policy如下所示（摘录）：

src 192.168.0.0/24 dst 10.0.0.10/32 
    dir fwd priority 2851 
    tmpl src xx.xx.xx.xx dst 192.168.50.2
        proto esp reqid 5 mode tunnel
src 192.168.0.0/24 dst 10.0.0.10/32 
    dir in priority 2851 
    tmpl src xx.xx.xx.xx dst 192.168.50.2
        proto esp reqid 5 mode tunnel
src 10.0.0.10/32 dst 192.168.0.0/24 
    dir out priority 2851 
    tmpl src 192.168.50.2 dst xx.xx.xx.xx
        proto esp reqid 5 mode tunnel

这意味着只有本地IP地址10.0.0.10具有相应的xfrm lookup规则。这就是为什么需要NAT的原因，除非VM子网已添加到IPsec。

— 马蒂亚斯·赫利齐乌斯（Matthias Herlitzius）
source
By using our site, you acknowledge that you have read and understand our Cookie Policy and Privacy Policy.
Licensed under cc by-sa 3.0 with attribution required.