这是我在Fedora 16中的安装日志：
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-8X1GaP/vmci-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
CC [M] /tmp/modconfig-8X1GaP/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-8X1GaP/vmci-only/driverLog.o
LD [M] /tmp/modconfig-8X1GaP/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-8X1GaP/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-8X1GaP/vmci-only/vmci.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-8X1GaP/vmci-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-8X1GaP/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory `/tmp/modconfig-8X1GaP/vmci-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/message.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/link.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/request.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/tcp.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/file.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/inode.o
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c: In function ‘HgfsPermission’:
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c:1755:8: warning: ‘dentry’ may be used uninitialized in this function [-Wuninitialized]
/tmp/modconfig-8X1GaP/vmhgfs-only/inode.c:1813:22: note: ‘dentry’ was declared here
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/super.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/vmci.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/module.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/page.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-8X1GaP/vmhgfs-only/kernelStubsLinux.o
LD [M] /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/modconfig-8X1GaP/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory `/tmp/modconfig-8X1GaP/vmhgfs-only'
Using 2.6.x kernel build system.
make: Entering directory `/tmp/modconfig-SN1mhC/vmxnet-only'
/usr/bin/make -C /lib/modules/3.6.11-4.fc16.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
CC [M] /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/modconfig-SN1mhC/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.6.11-4.fc16.x86_64'
/usr/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-SN1mhC/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-SN1mhC/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/modconfig-SN1mhC/vmxnet-only'
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
!!! [EXPERIMENTAL] !!!
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. By selecting yes,
you will be enabling this experimental feature. You can always disable this
feature by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Thinprint provides driver-free printing. Do you wish to enable this feature?
[no]
Disabling timer-based audio scheduling in pulseaudio.
Detected X server version 1.11.4
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
Starting Virtual Printing daemon: done
Starting vmware-tools (via systemctl): [ OK ]
The configuration of VMware Tools 9.2.3 build-1031360 for Linux for this
running kernel completed successfully.
请注意，有一个问题“VMware Host-Guest Filesystem允许共享文件夹[是]”，然后安装hgfs.ko，然后正常安装vmxnet.ko。
这是我在Fedora 18中获得的日志
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
Before you can compile modules, you need to have the following installed...
make gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/bin/gcc".
The path "/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers at
"/lib/modules/3.9.4-200.fc18.x86_64/build/include".
The path "/lib/modules/3.9.4-200.fc18.x86_64/build/include" appears to be a
valid path to the 3.9.4-200.fc18.x86_64 kernel headers.
Would you like to change it? [no]
make: Entering directory `/tmp/modconfig-jub19n/vmxnet-only'
/bin/make -C /lib/modules/3.9.4-200.fc18.x86_64/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory `/usr/src/kernels/3.9.4-200.fc18.x86_64'
CC [M] /tmp/modconfig-jub19n/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-jub19n/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/modconfig-jub19n/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/3.9.4-200.fc18.x86_64'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory `/tmp/modconfig-jub19n/vmxnet-only'
make[1]: `postbuild' is up to date.
make[1]: Leaving directory `/tmp/modconfig-jub19n/vmxnet-only'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/modconfig-jub19n/vmxnet-only'
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
!!! [EXPERIMENTAL] !!!
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. By selecting yes,
you will be enabling this experimental feature. You can always disable this
feature by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Thinprint provides driver-free printing. Do you wish to enable this feature?
[no]
Disabling timer-based audio scheduling in pulseaudio.
Detected X server version 1.13.3
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Creating a new initrd boot image for the kernel.
Starting Virtual Printing daemon: done
Starting vmware-tools (via systemctl): [ OK ]
The configuration of VMware Tools 9.2.3 build-1031360 for Linux for this
running kernel completed successfully.
我也试过了 open-vm-tools食谱 。但，
[root@localhost Documents]# mount -t vmhgfs .host:/ /mnt/hgfs
Error: cannot mount filesystem: No such device
我不知道vm-tools支持站点在哪里。
更新
我检查过并安装了vmxnet3 configure_module('vmxnet3') 在 vmware-config-tools.pl。它达不到 configure_module('vmhgfs') 因为
# vmhgfs now depends on vmci. Check to ensure it's configured.
if (defined(db_get_answer_if_exists('VMCI_CONFED')) &&
db_get_answer('VMCI_CONFED') ne 'yes') {
return 1;
}
默默地“保护”来自我们需求的呼叫。我可以这么说 db_get_answer_if_exists('VMCI_CONFED')) = 1, db_get_answer('VMCI_CONFED') = 'no' 和警告
另一个模块vmci已经安装在这个系统上 安装程序或程序包，此安装程序不会修改。使用 国旗 --clobber-kernel-modules = vmci来覆盖。
在上面的日志中。