在12.10暂停后恢复时无声音[关闭]

该问题已在12.10内开始。在完美运作之前。现在，即使重新启动alsa也不起作用，我也必须重新启动。

请询问详细信息。我正在运行Ubuntu 12.10，带有gnome 3.6的统一DE，没有第三方驱动程序。

谢谢

这是sudo lshw输出：http : //pastebin.com/vh3SGcZa

我尝试删除和读取音频内核模块-但是

不能sudo modprobe -r snd_hda_intel。它给FATAL: Module snd_hda_intel is in use

这是您的/etc/modprobe.d/alsa-base.conf内容：http : //pastebin.com/yvArB2ex

我的笔记本电脑型号是HP 6730s

在/var/log/syslog我发现以下内容：

kernel: [   33.847111] pci_pm_runtime_suspend(): azx_runtime_suspend+0x0/0x40 [snd_hda_intel] returns -11

cat /sys/module/snd_hda_intel/parameters/power_save给0 cat /sys/bus/pci/devices/0000\:00\:1b.0/power/control给on

pacmd list-sinks：

Welcome to PulseAudio! Use "help" for usage information.
>>> 1 sink(s) available.
  * index: 0
    name: <alsa_output.pci-0000_00_1b.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE 
    priority: 9959
    volume: 0: 100% 1: 100%
            0: 0,00 dB 1: 0,00 dB
            balance 0,00
    base volume: 100%
                 0,00 dB
    volume steps: 65537
    muted: no
    current latency: 0,00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le ch 2 48000 Hz
    channel map: front-left,front-right
                 Stereo
    used by: 0
    linked by: 0
    configured latency: 0,00 ms; range is 1,00 .. 341,33 ms
    card: 0 <alsa_card.pci-0000_00_1b.0>
    module: 4
    properties:
        alsa.resolution_bits = "16"
        device.api = "alsa"
        device.class = "sound"
        alsa.class = "generic"
        alsa.subclass = "generic-mix"
        alsa.name = "AD198x Analog"
        alsa.id = "AD198x Analog"
        alsa.subdevice = "0"
        alsa.subdevice_name = "subdevice #0"
        alsa.device = "0"
        alsa.card = "0"
        alsa.card_name = "HDA Intel"
        alsa.long_card_name = "HDA Intel at 0xd8900000 irq 49"
        alsa.driver_name = "snd_hda_intel"
        device.bus_path = "pci-0000:00:1b.0"
        sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card0"
        device.bus = "pci"
        device.vendor.id = "8086"
        device.vendor.name = "Intel Corporation"
        device.product.name = "82801I (ICH9 Family) HD Audio Controller"
        device.form_factor = "internal"
        device.string = "front:0"
        device.buffering.buffer_size = "65536"
        device.buffering.fragment_size = "32768"
        device.access_mode = "mmap+timer"
        device.profile.name = "analog-stereo"
        device.profile.description = "Stereo analogico"
        device.description = "Audio interno Stereo analogico"
        alsa.mixer_name = "Analog Devices AD1984A"
        alsa.components = "HDA:11d4194a,103c3614,00100400 HDA:11c11040,103c1378,00100200"
        module-udev-detect.discovered = "1"
        device.icon_name = "audio-card-pci"
    ports:
        analog-output: Uscita analogica (priority 9900, available: unknown)
            properties:

    active port: <analog-output>

您是否尝试过以下操作？

sudo gedit /etc/pm/sleep.d/50alsa

将以下行添加到文件中。

case "$1" in
        hibernate|suspend)
                # Stopping is not required
                ;;
        thaw|resume)
                /sbin/alsa force-reload
                ;;
        *) exit $NA
                ;;
esac

按Ctrl+ S保存此文件，然后使用以下命令将该文件可执行。

sudo chmod +x /etc/pm/sleep.d/50alsa

您的日志中的错误似乎表明挂起声卡时出现问题。您是否检查过是否已设置Linux来挂起声卡，或者是否禁用了节能功能？通过阅读有关该主题的几页内容，我认为以下信息可能会有所帮助。

在HDA-Intel驱动程序中检查节电：

cat /sys/module/snd_hda_intel/parameters/power_save

https://lesswatts.org/tips/misc.php

使用PCI接口检查“节能”选项：

cat /sys/bus/pci/devices/*/power/control  # '*' should match the sound card's PCI Address, as listed in 'lshw'

根据脉冲音频检查声卡的当前状态：

pacmd list-sinks     # Look for 'suspend', 'suspend-cause' and 'alsa.card_name'

http://en.wikibooks.org/wiki/Configuring_Sound_on_Linux/Pulse_Audio/Testing

错误代码-11表示-EAGAIN。根据当前的源代码

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=sound/pci/hda/hda_intel.c

3.7和主干之间发生了一些变化。中继中的此方法中不存在特定的返回值。幸运的是，问题已经在上游解决。您可以使用每日（或等待rc的）主线内核进行测试以确认这一点。如果一切正常，则可以使用该内核。如果没有，您可以将发现的结果报告给提到的错误条目（https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1066488），以帮助开发人员对其进行修复...