Hostapd辍学

我已经使用ubuntu 12.04结合了几个操作方法，将hostapd配置为访问点。一切工作长达几个小时，然后hostapd不再接受新的连接。

hostapd配置如下：

ssid=PNN
wpa_passphrase=somePassphrase
interface=wlan2
bridge=br0
auth_algs=3
channel=7
driver=nl80211
hw_mode=g
logger_stdout=-1
logger_stdout_level=2
max_num_sta=255
rsn_pairwise=CCMP
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP

使用的输出

hostapd -dd /etc/hostapd/hostapd.conf

通常情况下，按以下方式建立新连接：

mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for our SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Microsoft information element ignored (type=8 len=7)

STA 3c:d0:f8:10:0f:f0 sent probe request for broadcast SSID
mgmt::auth
authentication: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=1 status_code=0 wep=0
  New STA
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authentication OK (open system)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-AUTHENTICATE.indication(40:a6:d9:a5:63:dd, OPEN_SYSTEM)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
authentication reply: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=2 resp=0 (IE len=0)
mgmt::proberesp cb
mgmt::auth cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authenticated
mgmt::assoc_req
association request: STA=40:a6:d9:a5:63:dd capab_info=0x431 listen_interval=10
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
  new AID 1
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: association OK (aid 1)
mgmt::assoc_resp cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: associated (aid 1)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-ASSOCIATE.indication(40:a6:d9:a5:63:dd)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: start authentication
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: unauthorizing port
WPA: 40:a6:d9:a5:63:dd WPA_PTK_GROUP entering state IDLE
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITPSK
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
nl80211: Event message available
nl80211: Ignored unknown event (cmd=19)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
IEEE 802.1X: 121 bytes from 40:a6:d9:a5:63:dd
   IEEE 802.1X: version=2 type=3 length=117
wlan2: STA 40:a6:d9:a5:63:dd WPA: received EAPOL-Key frame (2/4 Pairwise)
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKCALCNEGOTIATING
WPA: PTK derivation - A1=00:0e:8e:3f:f9:71 A2=40:a6:d9:a5:63:dd
WPA: PMK - hexdump(len=32): [REMOVED]
WPA: PTK - hexdump(len=48): [REMOVED]
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKCALCNEGOTIATING2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKINITNEGOTIATING
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 3/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=1 mic=1 ack=1 install=1 pairwise=8 kde_len=46 keyidx=1 encr=1)
Plaintext EAPOL-Key Key Data - hexdump(len=56): [REMOVED]
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=151 - ack=1
IEEE 802.1X: 99 bytes from 40:a6:d9:a5:63:dd
   IEEE 802.1X: version=2 type=3 length=95
wlan2: STA 40:a6:d9:a5:63:dd WPA: received EAPOL-Key frame (4/4 Pairwise)
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKINITDONE
wpa_driver_nl80211_set_key: ifindex=6 alg=3 addr=0x216f2b0 key_idx=0 set_tx=1 seq_len=0 key_len=16
   addr=40:a6:d9:a5:63:dd
AP-STA-CONNECTED 40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: authorizing port
wlan2: STA 40:a6:d9:a5:63:dd RADIUS: starting accounting session 50E3DF21-00000000
wlan2: STA 40:a6:d9:a5:63:dd WPA: pairwise key handshake completed (RSN)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Microsoft information element ignored (type=8 len=7)

STA 3c:d0:f8:10:0f:f0 sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
Unknown Microsoft information element ignored (type=8 len=7)

STA 5c:95:ae:d8:b7:ec sent probe request for broadcast SSID
mgmt::proberesp cb

一旦hostapd不再接受新的连接，输出如下：

mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for our SSID
mgmt::proberesp cb
mgmt::auth
authentication: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=1 status_code=0 wep=0
  New STA
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authentication OK (open system)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-AUTHENTICATE.indication(40:a6:d9:a5:63:dd, OPEN_SYSTEM)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
authentication reply: STA=40:a6:d9:a5:63:dd auth_alg=0 auth_transaction=2 resp=0 (IE len=0)
mgmt::auth cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: authenticated
mgmt::assoc_req
association request: STA=40:a6:d9:a5:63:dd capab_info=0x431 listen_interval=10
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
  new AID 1
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: association OK (aid 1)
mgmt::assoc_resp cb
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: associated (aid 1)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-ASSOCIATE.indication(40:a6:d9:a5:63:dd)
wlan2: STA 40:a6:d9:a5:63:dd MLME: MLME-DELETEKEYS.request(40:a6:d9:a5:63:dd)
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: event 1 notification
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd WPA: start authentication
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: unauthorizing port
WPA: 40:a6:d9:a5:63:dd WPA_PTK_GROUP entering state IDLE
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state AUTHENTICATION2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITPSK
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
nl80211: Event message available
nl80211: Ignored unknown event (cmd=19)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
wlan2: STA 40:a6:d9:a5:63:dd WPA: sending 1/4 msg of 4-Way Handshake
WPA: Send EAPOL(version=2 secure=0 mic=0 ack=1 install=0 pairwise=8 kde_len=0 keyidx=0 encr=0)
IEEE 802.1X: 40:a6:d9:a5:63:dd TX status - version=2 type=3 length=95 - ack=1
STA 00:15:6d:60:da:3b sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
wlan2: STA 40:a6:d9:a5:63:dd WPA: EAPOL-Key timeout
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state PTKSTART
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state DISCONNECT
hostapd_wpa_auth_disconnect: WPA authenticator requests disconnect: STA 40:a6:d9:a5:63:dd reason 2
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state DISCONNECTED
WPA: 40:a6:d9:a5:63:dd WPA_PTK entering state INITIALIZE
wpa_driver_nl80211_set_key: ifindex=6 alg=0 addr=0x263c270 key_idx=0 set_tx=1 seq_len=0 key_len=0
   addr=40:a6:d9:a5:63:dd
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.1X: unauthorizing port
wlan2: STA 40:a6:d9:a5:63:dd IEEE 802.11: deauthenticated due to local deauth request
nl80211: Event message available
nl80211: Ignored unknown event (cmd=20)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:a5:63:dd sent probe request for broadcast SSID
mgmt::proberesp cb
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
unknown vendor specific information element ignored (vendor OUI 00:10:18 len=9)
STA 40:a6:d9:b0:cd:fd sent probe request for broadcast SSID
mgmt::proberesp cb

运行以下命令可将问题再解决几个小时。

sudo service hostapd restart

我已经完成了尽可能多的阅读，并尝试将wlan2的txpower从16dbm减少到10dbm，以解决稳定性问题，但问题仍然存在。

如果有人可以提供帮助，将不胜感激。

12.04 hostapd

— 马克
source

关闭hostapd服务，然后使用sudo hostapd -dd /etc/hostapd/hostapd.conf启动它。希望它将提供更多详细信息

— 字符串

看来，这似乎与驱动程序有关。因为某些芯片组发生在我身上，而其他芯片组则没有。相同的配置。

— 阿尔巴·门德斯

@strings-这就是我从上面复制上述输出的地方。

— MarcF

@MarcF确保使用-dd运行时也使用lspci并找到jmendeth所提到的确切驱动程序，它很有可能是一个更好的驱动程序。

— 2013年

@jmendeth-我使用的是SparkLAN WPEA-111N卡// lspci提供// 04：00.0网络控制器：Atheros Communications Inc. AR928X无线网络适配器（PCI-Express）（rev 01）

— MarcF 2013年

运行sudo iwconfig并关闭卡的“电源管理”。重新启动，看看现在还好。再次重新启动，看看现在还好。如果没有，我们必须将其添加到中Startup Applications。
我的一个朋友面临同样的问题。默认的Atheros驱动程序应该被指责。您的TX日志已填满，导致身份验证失败。

在“软件来源” /“软件和更新”中，启用“更新”标签下的“反向端口”。

然后更新系统。

也： sudo apt-get install linux-backports-modules-cw-3.6-precise-generic

重新启动并检查。
如果仍然失败，请在此处检查：解决：Ubuntu 12.04 Wifi驱动程序

— 汤姆·凯特
source

@MarcF是否有效，请通过评论告知我。并接受“答案”（如果它有效）可以帮助其他人知道首先要尝试的方法。:-)

— TomKat

@TomKat是正确的，它无法进行身份验证握手的原因是因为您的TX日志已填充255个条目。之后，您重新启动该过程，并且暂时恢复正常，然后重复同样的问题。降低Tx功率会减慢两次故障之间的时间的原因是，因为您实质上限制了可能的连接范围，因此按“每小时”计算，该范围内的人员减少了。如此少的连接=两次故障之间的时间更长...否则，我又可能成为WAY OFF。

— 贝里尼
source