VirtualBox rcvboxdrv设置错误“错误的参数设置”

升级内核后，VirtualBox像往常一样抱怨说VirtualBox Linux内核驱动程序（vboxdrv）未加载，因此我必须执行以下命令：

sudo /sbin/rcvboxdrv setup

不幸的是，这一次，执行rcvboxdrv setup失败并显示消息Bad argument setup。我猜这是Oracle页面上最近的VirtualBox软件包中引入的回归错误。

如何解决该问题并能够运行VirtualBox？

在故障单上的注释中，运行以下命令：

sudo /usr/lib/virtualbox/vboxdrv.sh setup

而不是VirtualBox给出的命令。

在Oracle的bugtracker上，我发现此问题已在“测试”构建中解决：https : //www.virtualbox.org/wiki/Testbuilds。

参考：https : //www.virtualbox.org/ticket/15055

在解决此问题之前，您可以编辑/sbin/rcvboxdrv文件（例如，在使用Nano编辑器的终端中通过sudo nano /sbin/rcvboxdrv）并添加一些行：

[…]
while test -n "${1}"; do
    case "${1}" in
        --nostart)
            START=
            ;;
        # START Workaround for https://www.virtualbox.org/ticket/15055
        setup)
            /usr/lib/virtualbox/vboxdrv.sh setup
            ;;
        # END
        *)
            echo "Bad argument ${1}" >&2
            exit 1
            ;;
    esac
    shift
done
[…]

使用CTRL + O保存更改。之后，您应该可以sudo /sbin/rcvboxdrv setup再次运行。

我在带有VirtualBox 5.0.14的Kubuntu 14.04.3上遇到了相同的问题。先前的答案均无效，但@Takkat的评论提示

sudo apt-get install --reinstall virtualbox-5.0

致力于解决问题。

我在Redhat7上遇到了同样的问题。在另一个论坛上找到了建议运行：/usr/lib/virtualbox/vboxdrv.sh setup这解决了该问题。我的virtualbox现在正在工作。

有一个解决方法：

将还原/sbin/rcvboxdrv到旧版本可解决此问题。如果文件的旧版本不再可用，请使用以下副本：

#! /bin/sh
# Oracle VM VirtualBox
# Linux kernel module init script

#
# Copyright (C) 2006-2015 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#

# chkconfig: 345 20 80
# description: VirtualBox Linux kernel module
#
### BEGIN INIT INFO
# Provides:       vboxdrv
# Required-Start: $syslog
# Required-Stop:
# Default-Start:  2 3 4 5
# Default-Stop:   0 1 6
# Short-Description: VirtualBox Linux kernel module
### END INIT INFO

PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH
DEVICE=/dev/vboxdrv
LOG="/var/log/vbox-install.log"
VERSION=5.0.12
MODPROBE=/sbin/modprobe

if $MODPROBE -c | grep -q '^allow_unsupported_modules  *0'; then
  MODPROBE="$MODPROBE --allow-unsupported-modules"
fi

[ -f /etc/debian_release -a -f /lib/lsb/init-functions ] || NOLSB=yes
[ -f /etc/vbox/vbox.cfg ] && . /etc/vbox/vbox.cfg
export BUILD_TYPE
export USERNAME
export USER=$USERNAME

if [ -n "$INSTALL_DIR" ]; then
    VBOXMANAGE="$INSTALL_DIR/VBoxManage"
    MODULE_SRC="$INSTALL_DIR/src/vboxhost"
else
    VBOXMANAGE="/usr/lib/virtualbox/VBoxManage"
    MODULE_SRC="/usr/share/virtualbox/src/vboxhost"
fi
BUILDINTMP="$MODULE_SRC/build_in_tmp"
DODKMS="$MODULE_SRC/do_dkms"

# silently exit if the package was uninstalled but not purged,
# applies to Debian packages only (but shouldn't hurt elsewhere)
[ ! -f /etc/debian_release -o -x $VBOXMANAGE -a -x $BUILDINTMP ] || exit 0

if [ -n "$NOLSB" ]; then
    if [ -f /etc/redhat-release ]; then
        system=redhat
    elif [ -f /etc/SuSE-release ]; then
        system=suse
    elif [ -f /etc/gentoo-release ]; then
        system=gentoo
    fi
fi

[ -r /etc/default/virtualbox ] && . /etc/default/virtualbox

if [ -z "$NOLSB" ]; then
    . /lib/lsb/init-functions
    fail_msg() {
        echo ""
        log_failure_msg "$1"
    }
    succ_msg() {
        log_end_msg 0
    }
    begin_msg() {
        log_daemon_msg "$@"
    }
else
    if [ "$system" = "redhat" ]; then
        . /etc/init.d/functions
        fail_msg() {
            echo -n " "
            echo_failure
            echo
            echo "  ($1)"
        }
        succ_msg() {
            echo -n " "
            echo_success
            echo
        }
    elif [ "$system" = "suse" ]; then
        . /etc/rc.status
        fail_msg() {
            rc_failed 1
            rc_status -v
            echo "  ($1)"
        }
        succ_msg() {
            rc_reset
            rc_status -v
        }
    elif [ "$system" = "gentoo" ]; then
        if [ -f /sbin/functions.sh ]; then
            . /sbin/functions.sh
        elif [ -f /etc/init.d/functions.sh ]; then
            . /etc/init.d/functions.sh
        fi
        fail_msg() {
            eerror "$1"
        }
        succ_msg() {
            eend "$?"
        }
        begin_msg() {
            ebegin "$1"
        }
        if [ "`which $0`" = "/sbin/rc" ]; then
            shift
        fi
    else
        fail_msg() {
            echo " ...failed!"
            echo "  ($1)"
        }
        succ_msg() {
            echo " ...done."
        }
    fi
    if [ "$system" != "gentoo" ]; then
        begin_msg() {
            [ -z "${1:-}" ] && return 1
            if [ -z "${2:-}" ]; then
                echo -n "$1"
            else
                echo -n "$1: $2"
            fi
        }
    fi
fi

failure()
{
    fail_msg "$1"
    exit 0
}

running()
{
    lsmod | grep -q "$1[^_-]"
}

start()
{
    begin_msg "Starting VirtualBox kernel modules"
    if [ -d /proc/xen ]; then
        failure "Running VirtualBox in a Xen environment is not supported"
    fi
    if ! running vboxdrv; then
        if ! rm -f $DEVICE; then
            failure "Cannot remove $DEVICE"
        fi
        if ! $MODPROBE vboxdrv > /dev/null 2>&1; then
            failure "modprobe vboxdrv failed. Please use 'dmesg' to find out why"
        fi
        sleep .2
    fi
    # ensure the character special exists
    if [ ! -c $DEVICE ]; then
        MAJOR=`sed -n 's;\([0-9]\+\) vboxdrv$;\1;p' /proc/devices`
        if [ ! -z "$MAJOR" ]; then
            MINOR=0
        else
            MINOR=`sed -n 's;\([0-9]\+\) vboxdrv$;\1;p' /proc/misc`
            if [ ! -z "$MINOR" ]; then
                MAJOR=10
            fi
        fi
        if [ -z "$MAJOR" ]; then
            rmmod vboxdrv 2>/dev/null
            failure "Cannot locate the VirtualBox device"
        fi
        if ! mknod -m 0660 $DEVICE c $MAJOR $MINOR 2>/dev/null; then
            rmmod vboxdrv 2>/dev/null
            failure "Cannot create device $DEVICE with major $MAJOR and minor $MINOR"
        fi
    fi
    # ensure permissions
    if ! chown :root $DEVICE 2>/dev/null; then
        rmmod vboxpci 2>/dev/null
        rmmod vboxnetadp 2>/dev/null
        rmmod vboxnetflt 2>/dev/null
        rmmod vboxdrv 2>/dev/null
        failure "Cannot change group root for device $DEVICE"
    fi
    if ! $MODPROBE vboxnetflt > /dev/null 2>&1; then
        failure "modprobe vboxnetflt failed. Please use 'dmesg' to find out why"
    fi
    if ! $MODPROBE vboxnetadp > /dev/null 2>&1; then
        failure "modprobe vboxnetadp failed. Please use 'dmesg' to find out why"
    fi
    if ! $MODPROBE vboxpci > /dev/null 2>&1; then
        failure "modprobe vboxpci failed. Please use 'dmesg' to find out why"
    fi
    # Create the /dev/vboxusb directory if the host supports that method
    # of USB access.  The USB code checks for the existance of that path.
    if grep -q usb_device /proc/devices; then
        mkdir -p -m 0750 /dev/vboxusb 2>/dev/null
        chown root:vboxusers /dev/vboxusb 2>/dev/null
    fi
    succ_msg
}

stop()
{
    begin_msg "Stopping VirtualBox kernel modules"
    if running vboxpci; then
        if ! rmmod vboxpci 2>/dev/null; then
            failure "Cannot unload module vboxpci"
        fi
    fi
    if running vboxnetadp; then
        if ! rmmod vboxnetadp 2>/dev/null; then
            failure "Cannot unload module vboxnetadp"
        fi
    fi
    if running vboxdrv; then
        if running vboxnetflt; then
            if ! rmmod vboxnetflt 2>/dev/null; then
                failure "Cannot unload module vboxnetflt"
            fi
        fi
        if ! rmmod vboxdrv 2>/dev/null; then
            failure "Cannot unload module vboxdrv"
        fi
        if ! rm -f $DEVICE; then
            failure "Cannot unlink $DEVICE"
        fi
    fi
    succ_msg
}

# enter the following variables in /etc/default/virtualbox:
#   SHUTDOWN_USERS="foo bar"  
#     check for running VMs of user foo and user bar
#   SHUTDOWN=poweroff
#   SHUTDOWN=acpibutton
#   SHUTDOWN=savestate
#     select one of these shutdown methods for running VMs
stop_vms()
{
    wait=0
    for i in $SHUTDOWN_USERS; do
        # don't create the ipcd directory with wrong permissions!
        if [ -d /tmp/.vbox-$i-ipc ]; then
            export VBOX_IPC_SOCKETID="$i"
            VMS=`$VBOXMANAGE --nologo list runningvms | sed -e 's/^".*".*{\(.*\)}/\1/' 2>/dev/null`
            if [ -n "$VMS" ]; then
                if [ "$SHUTDOWN" = "poweroff" ]; then
                    begin_msg "Powering off remaining VMs"
                    for v in $VMS; do
                        $VBOXMANAGE --nologo controlvm $v poweroff
                    done
                    succ_msg
                elif [ "$SHUTDOWN" = "acpibutton" ]; then
                    begin_msg "Sending ACPI power button event to remaining VMs"
                    for v in $VMS; do
                        $VBOXMANAGE --nologo controlvm $v acpipowerbutton
                        wait=30
                    done
                    succ_msg
                elif [ "$SHUTDOWN" = "savestate" ]; then
                    begin_msg "Saving state of remaining VMs"
                    for v in $VMS; do
                        $VBOXMANAGE --nologo controlvm $v savestate
                    done
                    succ_msg
                fi
            fi
        fi
    done
    # wait for some seconds when doing ACPI shutdown
    if [ "$wait" -ne 0 ]; then
        begin_msg "Waiting for $wait seconds for VM shutdown"
        sleep $wait
        succ_msg
    fi
}

# setup_script
setup()
{
    stop
    DKMS=`which dkms 2>/dev/null`
    if [ -n "$DKMS" ]; then
      begin_msg "Uninstalling old VirtualBox DKMS kernel modules"
      $DODKMS uninstall vboxhost vboxdrv vboxnetflt vboxnetadp > $LOG
      succ_msg
    fi
    if find /lib/modules/`uname -r` -name "vboxpci\.*" 2>/dev/null|grep -q vboxpci; then
        begin_msg "Removing old VirtualBox pci kernel module"
        find /lib/modules/`uname -r` -name "vboxpci\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi  
    if find /lib/modules/`uname -r` -name "vboxnetadp\.*" 2>/dev/null|grep -q vboxnetadp; then
        begin_msg "Removing old VirtualBox netadp kernel module"
        find /lib/modules/`uname -r` -name "vboxnetadp\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi  
    if find /lib/modules/`uname -r` -name "vboxnetflt\.*" 2>/dev/null|grep -q vboxnetflt; then
        begin_msg "Removing old VirtualBox netflt kernel module"
        find /lib/modules/`uname -r` -name "vboxnetflt\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi  
    if find /lib/modules/`uname -r` -name "vboxdrv\.*" 2>/dev/null|grep -q vboxdrv; then
        begin_msg "Removing old VirtualBox kernel module"
        find /lib/modules/`uname -r` -name "vboxdrv\.*" 2>/dev/null|xargs rm -f 2>/dev/null
        succ_msg
    fi
    if [ -n "$DKMS" ]; then
      begin_msg "Trying to register the VirtualBox kernel modules using DKMS"
      if ! $DODKMS install vboxhost $VERSION >> $LOG; then
        fail_msg "Failed, trying without DKMS"
        DKMS=""
      fi
    fi
    if [ -z "$DKMS" ]; then
      begin_msg "Recompiling VirtualBox kernel modules"
      if ! $BUILDINTMP \
          --save-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxdrv" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
      if ! $BUILDINTMP \
          --use-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxnetflt" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
      if ! $BUILDINTMP \
          --use-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxnetadp" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
      if ! $BUILDINTMP \
          --use-module-symvers /tmp/vboxdrv-Module.symvers \
          --module-source "$MODULE_SRC/vboxpci" \
          --no-print-directory install >> $LOG 2>&1; then
          failure "Look at $LOG to find out what went wrong"
      fi
    fi
    rm -f /etc/vbox/module_not_compiled
    succ_msg
    start
}

dmnstatus()
{
    if running vboxdrv; then
        str="vboxdrv"
        if running vboxnetflt; then
            str="$str, vboxnetflt"
            if running vboxnetadp; then
                str="$str, vboxnetadp"
            fi
        fi
        if running vboxpci; then
            str="$str, vboxpci"
        fi
        echo "VirtualBox kernel modules ($str) are loaded."
        for i in $SHUTDOWN_USERS; do
            # don't create the ipcd directory with wrong permissions!
            if [ -d /tmp/.vbox-$i-ipc ]; then
                export VBOX_IPC_SOCKETID="$i"
                VMS=`$VBOXMANAGE --nologo list runningvms | sed -e 's/^".*".*{\(.*\)}/\1/' 2>/dev/null`
                if [ -n "$VMS" ]; then
                    echo "The following VMs are currently running:"
                    for v in $VMS; do
                       echo "  $v"
                    done
                fi
            fi
        done
    else
        echo "VirtualBox kernel module is not loaded."
    fi
}

case "$1" in
start)
    start
    ;;
stop)
    stop_vms
    stop
    ;;
stop_vms)
    stop_vms
    ;;
restart)
    stop && start
    ;;
force-reload)
    stop
    start
    ;;
setup)
    setup
    ;;
status)
    dmnstatus
    ;;
*)
    echo "Usage: $0 {start|stop|stop_vms|restart|force-reload|status|setup}"
    exit 1
esac

exit 0

希望这可以帮助。