在Windows 8.1的RAID 0上以双重启动方式安装UBUNTU 14.04（基于UBUNTU 13.10的AND Mint 16）时出现问题

好的，我知道这里有/ubuntu/455511/dual-boot-ubuntu-14-04-and-windows-7-on-fakeraid-installation-error-question-m#new-answer ？newreg = f2b8bde40c8947f8ac8e3cedec0d1964 ，该帖子为我提供了一些答案，但我不知道它是否与我需要的帮助完全匹配。我在RAID 0上运行，不确定是否为伪RAID。

刚开始，我正在运行Alienware（Dell）M17xR3。它随Windows 7一起提供。具有RAID 0阵列，我认为它是“伪” RAID，但我知道我也有硬件RAID控制器。以前已分区并已安装Ubuntu 13.04，安装它，创建分区和安装GRUB都没有问题。此后，我已升级到Windows 8.1 Pro，在安装过程中丢失了GRUB，但是从Windows的HDD分区大小来看，我知道我的Linux分区仍然存在。应该刚刚重新安装了GRUB，但是尝试重新格式化Linux分区并进行全新安装Ubuntu 14.04 x64还尝试了薄荷16 x64肉桂。完全相同的安装程序和完全相同的错误消息发生在自定义分区部分之后，只是??????。我不知道Windows 8是否创建了EFI / UEFI安装，但是我很确定Windows 7没有安装。

这是我将其发布到的线程的链接：http : //forums.linuxmint.com/viewtopic.php?f=46&t=164950&e=0

对于该线程，要求发布一些终端输出，因此它们是：

“ sudo parted -l”输出：

Error: Can't have a partition outside the disk!                           

Error: /dev/sdb: unrecognised disk label                                  

Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/isw_dcigjjhddj_M17X_RAID0p6: 212GB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End    Size   File system  Flags
 1      0.00B  212GB  212GB  ext4


Error: /dev/mapper/isw_dcigjjhddj_M17X_RAID0p5: unrecognised disk label   

Error: Can't have a partition outside the disk!                           

Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/isw_dcigjjhddj_M17X_RAID0p3: 758GB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End    Size   File system  Flags
 1      0.00B  758GB  758GB  ntfs


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/isw_dcigjjhddj_M17X_RAID0p2: 14.2GB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End     Size    File system  Flags
 1      0.00B  14.2GB  14.2GB  ntfs


Model: Linux device-mapper (linear) (dm)
Disk /dev/mapper/isw_dcigjjhddj_M17X_RAID0p1: 41.1MB
Sector size (logical/physical): 512B/512B
Partition Table: loop

Number  Start  End     Size    File system  Flags
 1      0.00B  41.1MB  41.1MB  fat16


Model: Linux device-mapper (striped) (dm)
Disk /dev/mapper/isw_dcigjjhddj_M17X_RAID0: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system  Flags
 1      32.3kB  41.1MB  41.1MB  primary   fat16        diag
 2      41.9MB  14.2GB  14.2GB  primary   ntfs         boot
 3      14.2GB  773GB   758GB   primary   ntfs
 4      773GB   1000GB  228GB   extended               lba
 6      773GB   984GB   212GB   logical   ext4
 5      984GB   1000GB  15.7GB  logical


Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0
has been opened read-only.
Model: PLDS DVD+-RW DL-8A4SH (scsi)
Disk /dev/sr0: 1252MB
Sector size (logical/physical): 2048B/2048B
Partition Table: mac

Number  Start  End     Size    File system  Name   Flags
 1      8192B  24.6kB  16.4kB               Apple
 2      171MB  180MB   9306kB               EFI

“ sudo blkid”输出：

/dev/loop0: TYPE="squashfs" 
/dev/sda: TYPE="isw_raid_member" 
/dev/sr0: LABEL="Linux Mint 16 Cinnamon 64-bit" TYPE="iso9660" 
/dev/sdb: TYPE="isw_raid_member" 
/dev/mapper/isw_dcigjjhddj_M17X_RAID0p1: SEC_TYPE="msdos" LABEL="DellUtility"  UUID="5450-4444" TYPE="vfat" 
/dev/mapper/isw_dcigjjhddj_M17X_RAID0p2: LABEL="RECOVERY" UUID="3C9A4EA39A4E5A12"     TYPE="ntfs" 
/dev/mapper/isw_dcigjjhddj_M17X_RAID0p3: UUID="C614C2E714C2D997" TYPE="ntfs" 
/dev/mapper/isw_dcigjjhddj_M17X_RAID0p6: UUID="e39970ed-c278-4135-a8fb-3806cd62835b" TYPE="ext4" 

“ lsblk”输出：

NAME                                   MAJ:MIN RM   SIZE RO TYPE   MOUNTPOINT
sda                                      8:0    0 465.8G  0 disk   
└─isw_dcigjjhddj_M17X_RAID0 (dm-0)     252:0    0 931.5G  0 dmraid 
  ├─isw_dcigjjhddj_M17X_RAID0p1 (dm-1) 252:1    0  39.2M  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p2 (dm-2) 252:2    0  13.2G  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p3 (dm-3) 252:3    0 706.4G  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p4 (dm-4) 252:4    0     1K  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p5 (dm-5) 252:5    0  14.6G  0 part   
  └─isw_dcigjjhddj_M17X_RAID0p6 (dm-6) 252:6    0 197.3G  0 part   
sdb                                      8:16   0 465.8G  0 disk   
└─isw_dcigjjhddj_M17X_RAID0 (dm-0)     252:0    0 931.5G  0 dmraid 
  ├─isw_dcigjjhddj_M17X_RAID0p1 (dm-1) 252:1    0  39.2M  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p2 (dm-2) 252:2    0  13.2G  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p3 (dm-3) 252:3    0 706.4G  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p4 (dm-4) 252:4    0     1K  0 part   
  ├─isw_dcigjjhddj_M17X_RAID0p5 (dm-5) 252:5    0  14.6G  0 part   
  └─isw_dcigjjhddj_M17X_RAID0p6 (dm-6) 252:6    0 197.3G  0 part   
sr0                                     11:0    1   1.2G  0 rom    /cdrom
loop0                                    7:0    0   1.1G  1 loop   /rofs

“ inxi -b”输出：

System:    Host: mint Kernel: 3.11.0-12-generic x86_64 (64 bit) Desktop: Gnome Distro: Linux Mint 16 Petra
Machine:   Mobo: Alienware model: M17xR3 version: A08 Bios: Alienware version: A08 date: 07/29/2011
CPU:       Quad core Intel Core i7-2670QM CPU (-HT-MCP-) clocked at 2192.734 MHz 
Graphics:  Card-1: Intel 2nd Generation Core Processor Family Integrated Graphics Controller 
           Card-2: NVIDIA GF116M [GeForce GT 560M] 
           X.Org: 1.14.3 drivers: (unloaded: fbdev,vesa) FAILED: nouveau,intel Resolution: 1920x1080@60.0hz 
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile GLX Version: 3.0 Mesa 9.2.1
Network:   Card-1: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet driver: atl1c 
           Card-2: Qualcomm Atheros AR93xx Wireless Network Adapter driver: ath9k 
Drives:    HDD Total Size: 1000.2GB (-)
Info:      Processes: 211 Uptime: 20 min Memory: 524.9/7932.9MB Client: Shell inxi: 1.8.4 

您试图将grub安装在错误的位置。尝试将其安装在Ubuntu分区中。

几年前，我为类似的双启动配置安装了EasyBCD，但没有任何问题。