ntfs-3g:输入/输出错误


8

在过去3天(更新后)中,我的Debian Jessie拒绝挂载NTFS磁盘。我重新安装了libfuse2和ntfs-3g,但是得到了相同的输入/输出错误

我在Windows 7和OSX Mavericks(使用ntfs-3g)下尝试了相同的磁盘,并且它们工作正常。我清除了ntfs-3g并重新安装,仍然是同样的问题。

磁盘有时会挂载,有时不会挂载。如果它们确实挂载,则有时可以进入挂载目录,而有时,我会收到bash错误的安装目录输入/输出错误。当我尝试使用ls -l时,我能够进入mount目录的次数是很多,而不是file / dir属性。

我曾尝试在Windows下使用ntfsfix和chkdisk,但它们均未报告任何问题,只是在Jessie安装下,突然我无法正确安装它们。

dmesg除了附加的外部磁盘外没有其他有用的信息:

[12816.210969] scsi 20:0:0:0: Direct-Access     Seagate  External         SG16 PQ: 0 ANSI: 4
[12816.211825] sd 20:0:0:0: Attached scsi generic sg7 type 0
[12816.212542] sd 20:0:0:0: [sdg] 732566642 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[12816.213591] sd 20:0:0:0: [sdg] Write Protect is off
[12816.213595] sd 20:0:0:0: [sdg] Mode Sense: bf 00 00 00
[12816.214782] sd 20:0:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[12816.215561] sd 20:0:0:0: [sdg] 732566642 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[12816.242055]  sdg: sdg1 sdg2
[12816.243244] sd 20:0:0:0: [sdg] 732566642 4096-byte logical blocks: (3.00 TB/2.72 TiB)
[12816.246031] sd 20:0:0:0: [sdg] Attached SCSI disk

parted /dev/sdg 'print'
Model: Seagate External (scsi)
Disk /dev/sdg: 3001GB
Sector size (logical/physical): 4096B/4096B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
 1      258kB   1038GB  1038GB  primary
 2      1038GB  3001GB  1962GB  primary

fdisk -l /dev/sdg
Note: sector size is 4096 (not 512)

Disk /dev/sdg: 3000.6 GB, 3000592965632 bytes
255 heads, 63 sectors/track, 45600 cylinders, total 732566642 sectors
Units = sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00090a06

   Device Boot      Start         End      Blocks   Id  System
/dev/sdg1              63   253473569  1013894028    7  HPFS/NTFS/exFAT
/dev/sdg2       253473792   732566527  1916370944   83  Linux

mount -t ntfs-3g /dev/sdg1 /media/Downloads
ntfs-3g-mount: failed to access mountpoint /media/Downloads: Input/output error

如果我设法通过安装

mount -t ntfs-3g /dev/sdg1 /media/Downloads

一旦我进入它:

cd media/Downloads 
root@athena:/media/Downloads# ls -l
ls: reading directory .: Input/output error
total 0
root@athena:/media/Downloads#

安装,但是说:

/dev/sdf1 on /media/Downloads type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)

我刹车了什么?

编辑

ntfsinfo -m /dev/sdg1

Volume is scheduled for check.
Please boot into Windows TWICE, or use the 'force' option.
NOTE: If you had not scheduled check and last time accessed this volume
using ntfsmount and shutdown system properly, then init scripts in your
distribution are broken. Please report to your distribution developers
(NOT to us!) that init scripts kill ntfsmount or mount.ntfs-fuse during
shutdown instead of proper umount.
Failed to open '/dev/sdg1'.

编辑#2

ntfsinfo -fm /dev/sdg1 
WARNING: Dirty volume mount was forced by the 'force' mount option.
Volume Information 
        Name of device: /dev/sdg1
        Device state: 11
        Volume Name: 
        Volume State: 91
        Volume Flags: 0x0001 DIRTY
        Volume Version: 3.1
        Sector Size: 4096
        Cluster Size: 4096
        Index Block Size: 4096
        Volume Size in Clusters: 253473506
MFT Information 
        MFT Record Size: 4096
        MFT Zone Multiplier: 0
        MFT Data Position: 24
        MFT Zone Start: 0
        MFT Zone End: 31684192
        MFT Zone Position: 4
        Current Position in First Data Zone: 31684192
        Current Position in Second Data Zone: 0
        Allocated clusters 145403 (0.1%)
        LCN of Data Attribute for FILE_MFT: 4
        FILE_MFTMirr Size: 4
        LCN of Data Attribute for File_MFTMirr: 126736753
        Size of Attribute Definition Table: 2560
        Number of Attached Extent Inodes: 0
FILE_Bitmap Information 
        FILE_Bitmap MFT Record Number: 6
        State of FILE_Bitmap Inode: 80
        Length of Attribute List: 0
        Number of Attached Extent Inodes: 0
FILE_Bitmap Data Attribute Information
        Decompressed Runlist: not done yet
        Base Inode: 6
        Attribute Types: not done yet
        Attribute Name Length: 0
        Attribute State: 3
        Attribute Allocated Size: 31686656
        Attribute Data Size: 31684192
        Attribute Initialized Size: 31684192
        Attribute Compressed Size: 0
        Compression Block Size: 0
        Compression Block Size Bits: 0
        Compression Block Clusters: 0
        Free Clusters: 199331046 (78.6%)

我将在几个小时内尝试将其安装在Windows下(我正在检查另一个我不想中断的磁盘)。

编辑#3

我回到窗户,扫描了磁盘。Windows确实发现了其中之一的问题,但它们都是固定的,可安装的和可浏览的。

但是,在Debian领导下,我仍然无能为力。我打开了Gparted,有趣的是,它抱怨:

Unable to read the contents of this file system!
Because of this some operations may be unavailable.
The cause might be a missing software package.
The following list of software packages is required for ntfs file system support:  ntfsprogs / ntfs-3g.

然而,

apt-cache policy ntfs-3g
ntfs-3g:
  Installed: 1:2014.2.15AR.2-1
  Candidate: 1:2014.2.15AR.2-1
  Version table:
 *** 1:2014.2.15AR.2-1 0

!!! 所以,我遇到了某种ntfs-3g错误,还是我的系统现在坏了???


Hrm ...重新启动并让Windows chkdsk,或者您可以尝试将-f添加到ntfsinfo
psusi 2014年

在我看来,它似乎已安装好,但无法读取。与内部NTFS硬键相同。
亚历克斯(Alex)

Answers:


11

这是ntfs-3g错误。降级ntfs-3g,它将起作用。我的1:2014版本有同样的问题,而版本没有问题1:2012(在“稳定的”存储库中)


1
如果您提到过错误,那就更好了,请参考它的链接。
PersianGulf 2014年

很有意思,我会尝试一下并回复您。
亚历克斯(Alex)

1
是的,您是对的,我降级为1:2012,它可以正常工作!
亚历克斯(Alex)

1
这个答案使我省了很多心。谢谢@Alex和@skilowatt!
史蒂文·爱德华兹

0

由于stable(Jessie)不再使用1:2012版本,请升级到unstable(Sid),当前为1:2016.2.22AR.1-3版本,如在skilowatt链接的错误报告中所述。

By using our site, you acknowledge that you have read and understand our Cookie Policy and Privacy Policy.
Licensed under cc by-sa 3.0 with attribution required.