我在跑
uname -r
4.10.6-1-ARCH
在我的Dell XPS 13开发人员版(2014年)中。我目前在wifi上遇到奇怪的问题(我将Networkamanger nm-applet
用于KDE):
1)在最肤浅的层面上,我观察到有时它可以很好地工作:当我启动我的电脑时,它已经连接到了wifi,有时它无法以任何方式连接(wifi 总是一样);
2)我尝试重新启动NM :,问题仍然存在。3)有时,如果我重新启动笔记本电脑,它又可以工作了,有时却不能。
4)我尝试使用 nmcli
nmcli connection up My-WiFi
然后我观察
dmesg
[ 250.165837] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 250.255882] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[ 272.004204] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 275.432861] wlp2s0: authenticate with 00:3a:9a:32:62:d3
[ 275.435513] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 1/3)
[ 275.440164] wlp2s0: 00:3a:9a:32:62:d3 unexpected authentication state: alg 0 (expected 0) transact 256 (expected 2)
[ 275.538092] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 2/3)
[ 275.540879] wlp2s0: authenticated
[ 275.544662] wlp2s0: associate with 00:3a:9a:32:62:d3 (try 1/3)
[ 275.546811] wlp2s0: RX AssocResp from 00:3a:9a:32:62:d3 (capab=0x431 status=0 aid=4)
[ 275.548267] wlp2s0: associated
[ 275.653364] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[ 297.004547] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 300.433810] wlp2s0: authenticate with 00:3a:9a:32:62:d3
[ 300.437019] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 1/3)
[ 300.438771] wlp2s0: authenticated
[ 300.441086] wlp2s0: associate with 00:3a:9a:32:62:d3 (try 1/3)
[ 300.443198] wlp2s0: RX AssocResp from 00:3a:9a:32:62:d3 (capab=0x431 status=0 aid=4)
[ 300.444175] wlp2s0: associated
[ 300.530232] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[ 322.003946] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 325.430498] wlp2s0: authenticate with 00:3a:9a:32:62:d3
[ 325.433405] wlp2s0: send auth to 00:3a:9a:32:62:d3 (try 1/3)
[ 325.435168] wlp2s0: authenticated
[ 325.437533] wlp2s0: associate with 00:3a:9a:32:62:d3 (try 1/3)
[ 325.439710] wlp2s0: RX AssocResp from 00:3a:9a:32:62:d3 (capab=0x431 status=0 aid=4)
[ 325.440978] wlp2s0: associated
[ 325.618536] wlp2s0: Limiting TX power to 14 dBm as advertised by 00:3a:9a:32:62:d3
[ 347.007641] wlp2s0: deauthenticating from 00:3a:9a:32:62:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 347.023798] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 347.025937] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 692.002060] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
总是有相同的错误。我不知道如何解决。请注意以下几点:
1)我的电脑特别是Linux(与ubuntu一起出售)
lspci -k
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
Subsystem: Intel Corporation Dual Band Wireless-AC 7260
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
2)所有必要的服务均处于活动状态
systemctl --type=service
UNIT LOAD ACTIVE SUB DESCRIPTION
dbus.service loaded active running D-Bus System Message Bus
gssproxy.service loaded active running GSSAPI Proxy Daemon
kmod-static-nodes.service loaded active exited Create list of required static device nodes fo
lm_sensors.service loaded active exited Initialize hardware monitoring sensors
NetworkManager.service loaded active running Network Manager
ntpd.service loaded active running Network Time Service
polkit.service loaded active running Authorization Manager
rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
sddm.service loaded active running Simple Desktop Display Manager
systemd-backlight@backlight:intel_backlight.service loaded active exited Load/Save Screen Backlight Brightness of backl
systemd-backlight@leds:dell::kbd_backlight.service loaded active exited Load/Save Screen Backlight Brightness of leds:
systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
user@1000.service loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
3)如果使用USB有线eth屏蔽,则可以毫无问题地与NM连接;
4)我也尝试直接与进行连接wpa_supplicant
,但是由于身份验证错误而无法连接,但是我强调我的userid和pwd是正确的,因为有时我可以毫无问题地进行连接
我该怎么办?
3
Havent 2016之前的XPS模型会因接口彼此靠近而在wifi和USB设备之间产生巨大的干扰问题,而在新版本中这些问题已得到一定程度的缓解?遇到问题时,您是否正在使用USB设备?
—
Rui F Ribeiro
我注意到插入USB eth屏蔽可以修改wifi错误的行为。但这似乎不是确定性的。无论如何理性思考,都有可能发现问题。
—
MaPo
—
GAD3R
不使用pacman?
—
MaPo
四个upvoted答案,一个公认的,在这里:unix.stackexchange.com/questions/386925/...
—
罗布