Questions tagged «aircrack-ng»

4
无法安装aircrack-ng
每当我尝试aircrack-ng在终端中安装时,都会出现以下错误: Package aircrack-ng is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: iw E: Package 'aircrack-ng' has no installation candidate" 我是Ubuntu的新手,所以不知道该怎么做。

2
使用'make'命令时出现错误(在Ubuntu 12.04上安装aircrack-ng)
我遵循了这些指示。我编辑了common.mak成功的文件,当我跑make我得到这个错误: mohd-arafat-hossain@TUD:~/aircrack-ng-1.1$ make make -C src all make[1]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src' make -C osdep make[2]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' Building for Linux make[3]: Entering directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' make[3]: `.os.Linux' is up to date. make[3]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' make[2]: Leaving directory `/home/mohd-arafat-hossain/aircrack-ng-1.1/src/osdep' gcc -g -W -Wall -O3 -D_FILE_OFFSET_BITS=64 -D_REVISION=0 -Iinclude -c -o aircrack-ng.o …



1
如何在BCM4360 [14e4:43a0]上打开监视模式?
我一直在尝试打开监视器模式,但没有成功。 sudo ifconfig wlp2s0 down sudo iwconfig wlp2s0 mode monitor 这是我得到的错误: Error for wireless request "Set Mode" (8B06) : SET failed on device wlp2s0 ; Operation not supported. 这是否意味着我的无线网卡根本不支持监控模式?如果是这样,我在这里有什么选择? 我在某处阅读了wl驱动程序不支持监视模式的信息,所以我做到了: sudo apt-get install firmware-b43-installer 但我没有成功。每当我清除bcmwl-kernel源时,即使安装了b43,我的Internet连接也会停止工作。 好的,因此在显示出我的驱动程序不支持监视器模式并且不支持b43后,我找到了解决此问题的方法。仅供参考: https://pentestmac.wordpress.com/tag/bcm4360/ 尽管该链接适用于Kali Linux,但适用于Ubuntu。当您运行以下命令时: echo 1 | sudo tee /proc/brcm_monitor0 它将使您将prisma0与air0dump一起使用。 希望这会有所帮助:)
By using our site, you acknowledge that you have read and understand our Cookie Policy and Privacy Policy.
Licensed under cc by-sa 3.0 with attribution required.