尝试通过此链接为ubuntu Desktop 18.04 LTS安装nvidia驱动程序。遵循了以上链接中的所有提示。
但是，在以下方面有些困惑：我使用的是nvidia驱动程序还是nouveau？我是否使用了正确版本的nvidia？我想使用390版。
我使用Nvidia GTX 1060，并使用Ubuntu Linux Desktop 18.04 LTS。
lspci -k | grep -EA2 'VGA|3D'
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
Subsystem: Dell GP106 [GeForce GTX 1060 6GB]
Kernel driver in use: nouveau
上面的命令显示我正在使用nouveau
而其他驱动程序显示我正在使用nvidia驱动程序
不知道该信任什么？
Edit1 感谢Luis的回答。根据您在尝试安装396驱动程序时的评论...我得到以下错误：
sudo apt install nvidia-driver-396
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
nvidia-driver-396 : Depends: nvidia-dkms-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Depends: nvidia-kernel-source-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Depends: nvidia-compute-utils-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Depends: libnvidia-decode-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Depends: libnvidia-encode-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Depends: nvidia-utils-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Depends: xserver-xorg-video-nvidia-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Depends: libnvidia-cfg1-396 (= 396.24-0ubuntu0~gpu18.04.1) but it is not going to be installed
Recommends: libnvidia-decode-396:i386 (= 396.24-0ubuntu0~gpu18.04.1)
Recommends: libnvidia-encode-396:i386 (= 396.24-0ubuntu0~gpu18.04.1)
Recommends: libnvidia-ifr1-396:i386 (= 396.24-0ubuntu0~gpu18.04.1)
Recommends: libnvidia-fbc1-396:i386 (= 396.24-0ubuntu0~gpu18.04.1)
E: Unable to correct problems, you have held broken packages.
然后什么时候
sudo apt install nvidia-settings
Reading package lists... Done
Building dependency tree
Reading state information... Done
nvidia-settings is already the newest version (396.24-0ubuntu0~gpu18.04.1).
nvidia-settings set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
Edit2 尝试了此链接， 即使从nvidia安装的专有驱动程序也无法正常工作。nouveau非常卡住，即使将其列入黑名单并试图将其删除也不会消失。
编辑3 重新安装没有解决问题...似乎是这里提到的常见错误
编辑4 尝试了这些
sudo apt purge nvidia-390
sudo apt install nvidia-kernel-source-396
sudo apt install nvidia-driver-396
然后（添加了nomodeset条目）
sudo vi /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset"
重新启动后，当我发出以下命令时：
lspci -k | grep -EA2 'VGA|3D'
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
Subsystem: Dell GP106 [GeForce GTX 1060 6GB]
Kernel modules: nvidiafb, nouveau, nvidia_drm, nvidia
但是问题是我现在的分辨率低得多-字体更大。如何解决？这行是什么意思：内核模块：nvidiafb，nouveau，nvidia_drm，nvidia是否按显示顺序排列了所有4个模块？当前分辨率为
xdpyinfo | awk '/dimensions/{print $2}'
800x600
进行此更改后，辅助监视器现已停止工作。朗德
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 800 x 600, current 800 x 600, maximum 800 x 600
default connected primary 800x600+0+0 0mm x 0mm
800x600 75.00*
看来这是我可以根据上述输出获得的最大分辨率。
Edit5 恢复grub nomodeset条目以具有正常分辨率。重新启动并仔细查看日志文件后，这就是我所发现的（只是相关行）
/var/log# cat gpu-manager.log
can't access /run/u-d-c-nvidia-was-loaded file
can't access /opt/amdgpu-pro/bin/amdgpu-pro-px
Looking for nvidia modules in /lib/modules/4.15.0-20-generic/updates/dkms
Found nvidia module: nvidia.ko
Looking for amdgpu modules in /lib/modules/4.15.0-20-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is intel loaded? yes
Is nouveau loaded? yes
Is nouveau blacklisted? yes
Is nvidia kernel module available? yes
Is amdgpu kernel module available? no
Vendor/Device Id: 8086:3e92
BusID "PCI:0@0:2:0"
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
The number of cards has changed!
Has the system changed? Yes
System configuration has changed
Unsupported discrete card vendor: 8086
Nothing to do
Xorg.0.log
[ 5.649] (--) PCI:*(0:1:0:0) 10de:1c03:1028:11d7 rev 161, Mem @ 0xeb000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 5.649] (II) LoadModule: "glx"
[ 5.649] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.649] (II) Module glx: vendor="X.Org Foundation"
[ 5.649] compiled for 1.19.6, module version = 1.0.0
[ 5.649] ABI class: X.Org Server Extension, version 10.0
[ 5.649] (==) Matched nouveau as autoconfigured driver 0
[ 5.649] (==) Matched modesetting as autoconfigured driver 1
[ 5.649] (==) Matched fbdev as autoconfigured driver 2
[ 5.649] (==) Matched vesa as autoconfigured driver 3
[ 5.649] (==) Assigned the driver to the xf86ConfigLayout
[ 5.649] (II) LoadModule: "nouveau"
[ 5.650] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 5.650] (II) Module nouveau: vendor="X.Org Foundation"
[ 5.650] compiled for 1.19.3, module version = 1.0.15
[ 5.650] Module class: X.Org Video Driver
[ 5.650] ABI class: X.Org Video Driver, version 23.0
[ 5.650] (II) LoadModule: "modesetting"
[ 5.650] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.650] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.650] compiled for 1.19.6, module version = 1.19.6
[ 5.650] Module class: X.Org Video Driver
[ 5.650] ABI class: X.Org Video Driver, version 23.0
[ 5.650] (II) LoadModule: "fbdev"
[ 5.650] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5.650] (II) Module fbdev: vendor="X.Org Foundation"
[ 5.650] compiled for 1.19.3, module version = 0.4.4
[ 5.650] Module class: X.Org Video Driver
[ 5.650] ABI class: X.Org Video Driver, version 23.0
[ 5.650] (II) LoadModule: "vesa"
[ 5.650] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.650] (II) Module vesa: vendor="X.Org Foundation"
[ 5.650] ABI class: X.Org Video Driver, version 23.0
[ 5.650] (II) NOUVEAU driver Date: Fri Apr 21 14:41:17 2017 -0400
[ 5.650] (II) NOUVEAU driver for NVIDIA chipset families :
[ 5.650] RIVA TNT (NV04)
[ 5.650] RIVA TNT2 (NV05)
[ 5.650] GeForce 256 (NV10)
[ 5.651] GeForce 2 (NV11, NV15)
[ 5.651] GeForce 4MX (NV17, NV18)
[ 5.651] GeForce 3 (NV20)
[ 5.651] GeForce 4Ti (NV25, NV28)
[ 5.651] GeForce FX (NV3x)
[ 5.651] GeForce 6 (NV4x)
[ 5.651] GeForce 7 (G7x)
[ 5.651] GeForce 8 (G8x)
[ 5.651] GeForce GTX 200 (NVA0)
[ 5.651] GeForce GTX 400 (NVC0)
[ 5.651] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.651] (II) FBDEV: driver for framebuffer: fbdev
[ 5.651] (II) VESA: driver for VESA chipsets: vesa
[ 5.651] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 5.769] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
[ 5.769] (EE) open /dev/dri/card0: No such file or directory
[ 5.769] (WW) Falling back to old probe method for modesetting
[ 5.769] (EE) open /dev/dri/card0: No such file or directory
[ 5.769] (II) Loading sub module "fbdevhw"
[ 5.769] (II) LoadModule: "fbdevhw"
[ 5.770] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.770] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5.770] compiled for 1.19.6, module version = 0.0.2
[ 5.770] ABI class: X.Org Video Driver, version 23.0
[ 5.770] (**) FBDEV(1): claimed PCI slot 1@0:0:0
[ 5.770] (II) FBDEV(1): using default device
[ 5.770] (WW) Falling back to old probe method for vesa
[ 5.770] (EE) Screen 0 deleted because of no matching config section.
[ 5.770] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.770] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 5.770] (==) FBDEV(0): RGB weight 888
[ 5.770] (==) FBDEV(0): Default visual is TrueColor
[ 5.770] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.770] (II) FBDEV(0): hardware: EFI VGA (video memory: 2400kB)
[ 5.770] (II) FBDEV(0): checking modes against framebuffer device...
[ 5.770] (II) FBDEV(0): checking modes against monitor...
[ 5.770] (--) FBDEV(0): Virtual size is 800x600 (pitch 800)
[ 5.770] (**) FBDEV(0): Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz
[ 5.770] (II) FBDEV(0): Modeline "current"x0.0 48.00 800 832 928 1024 600 604 608 624 -hsync -vsync -csync (46.9 kHz b)
[ 5.770] (==) FBDEV(0): DPI set to (96, 96)
[ 5.770] (II) Loading sub module "fb"
[ 5.770] (II) LoadModule: "fb"
[ 5.770] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.770] (II) Module fb: vendor="X.Org Foundation"
[ 5.770] compiled for 1.19.6, module version = 1.0.0
[ 5.770] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.770] (**) FBDEV(0): using shadow framebuffer
[ 5.770] (II) Loading sub module "shadow"
[ 5.770] (II) LoadModule: "shadow"
[ 5.770] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 5.772] (II) Module shadow: vendor="X.Org Foundation"
[ 5.772] compiled for 1.19.6, module version = 1.1.0
[ 5.772] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.772] (II) UnloadModule: "vesa"
[ 5.772] (II) Unloading vesa
[ 5.772] (==) Depth 24 pixmap format is 32 bpp
[ 5.772] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[ 5.773] (==) FBDEV(0): Backing store enabled
[ 5.773] (==) FBDEV(0): DPMS enabled
[ 5.773] (==) RandR enabled
[ 5.774] (II) SELinux: Disabled on system
[ 5.775] (II) AIGLX: Screen 0 is not DRI2 capable
[ 5.775] (EE) AIGLX: reverting to software rendering
编辑6 仍然没有为我解决。今天有一个间歇性的延迟。看着dmesg
# dmesg | grep nvidia
[ 2.391066] nvidia: loading out-of-tree module taints kernel.
[ 2.391070] nvidia: module license 'NVIDIA' taints kernel.
[ 2.393241] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 2.397378] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 2.397558] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.398536] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.24 Wed Apr 25 23:54:18 PDT 2018
[ 2.399519] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.399519] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 4.259151] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238
[ 7.067363] nvidia-modeset: Allocated GPU:0 (GPU-2299f1b5-2a33-6f69-67d2-919f812a967a) @ PCI:0000:01:00.0
编辑7 昨天，“有机大理石”发表了一条评论-我想让我在周末尝试一下。但是在作为一个好的实践开始之前，我想记录我的当前状态并发出以下命令：
ashu# lspci -k | grep -EA2 'VGA|3D'
01:00.0 VGA compatible controller: NVIDIA Corporation GP106 [GeForce GTX 1060 6GB] (rev a1)
Subsystem: Dell GP106 [GeForce GTX 1060 6GB]
Kernel driver in use: nvidia
我/etc/default/grub有
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
/var/log# cat gpu-manager.log
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /opt/amdgpu-pro/bin/amdgpu-pro-px
Looking for nvidia modules in /lib/modules/4.15.0-22-generic/updates/dkms
Found nvidia module: nvidia.ko
Looking for amdgpu modules in /lib/modules/4.15.0-22-generic/updates/dkms
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is amdgpu versioned? no
Is amdgpu pro stack? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is nvidia kernel module available? yes
Is amdgpu kernel module available? no
Vendor/Device Id: 8086:3e92
BusID "PCI:0@0:2:0"
Is boot vga? no
Vendor/Device Id: 10de:1c03
BusID "PCI:1@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card1", driven by "nvidia-drm"
Found "/dev/dri/card0", driven by "i915"
Number of connected outputs for /dev/dri/card0: 0
Does it require offloading? no
last cards number = 2
Has amd? no
Has intel? yes
Has nvidia? yes
How many cards? 2
Has the system changed? No
Unsupported discrete card vendor: 8086
Nothing to do
root@ashu-XPS-8930:/var/log# lshw -c video 2>&1 | grep driver
configuration: driver=nvidia latency=0
configuration: driver=i915 latency=0
root@ashu-XPS-8930:/var/log# dmesg | grep nvidia
[ 2.438396] nvidia: loading out-of-tree module taints kernel.
[ 2.438399] nvidia: module license 'NVIDIA' taints kernel.
[ 2.440419] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 2.444471] nvidia-nvlink: Nvlink Core is being initialized, major device number 240
[ 2.444631] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.449781] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 396.24.02 Thu May 24 03:44:56 PDT 2018
[ 2.450402] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.450403] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 1
[ 4.272315] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 238
[ 7.201052] nvidia-modeset: Allocated GPU:0 (GPU-2299f1b5-2a33-6f69-67d2-919f812a967a) @ PCI:0000:01:00.0
并且其他驱动程序也说
。
是的，它是固定的，但是如何以及何时？我不知道？ 感谢大家的帮助和建议。
编辑8也 能够在我的Dell XPS 9560笔记本电脑上修复。一个人应该检查这个文件：
/etc/modprobe.d/disable-nouveau.conf
blacklist nouveau
blacklist vga16fb
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
blacklist amd76_edac
options nouveau modeset=0
1
要杀死nouveau驱动程序，您可以执行此页面中间的步骤，以sudo su-adufray.com/blog/2018/06/02/nvidia-304-127-on-bionic开头， 然后重新启动。手动安装驱动程序时，此过程对我有用。
—
有机大理石'18
@OrganicMarble。谢谢，我会尽力而为，让您知道。
—
阿舒（Ashu）2013年
很高兴你把事情解决了！
—
有机大理石
Ubuntu可能应该更直接地警告用户-如果启用了UEFI安全启动，则无法安装专有的NVIDIA驱动程序。Google UEFI安全启动和mokutil。
—
瑞安·布德尼
